GSF Adriatic V

300 Foot Jack-up

General Description 

Design	Marathon LeTourneau 116-C
Dimensions	300 x 200 x 26 ft.
Spud can diameter	46 ft.
Legs (3)	410 ft. long square
Quarters capacity	100 persons
Operating water depth	300 ft.
Cantilever envelope	40 ft. by 30 ft.
Maximum cantilever extension (transom to rotary)	60 ft.
Maximum variable load (drilling)	5,563 kips

Drilling Equipment 

Derrick	170 ft. x 30 ft. MH Pyramid, with a static hook load capacity of 1,500,000 lbs. with fourteen lines
Drawworks	National-Oilwell 1625 DE, 2,400 hp, driven by three EMD D-79 DC motors, with an Elmagco 7838 auxiliary electric brake
Rotary table	National C-375, 37-1/2 in. driven by independent EMD D-79 electric motor, 2 speed gear box
Top drive	Varco TDS-4S, 650 short tons, continuous drilling torque 63,000 ft.-lbs., with a Varco PH-85 pipe handler
Pipe handling	Varco AR 3200 Iron Roughneck.
Mud pumps	Two National Oilwell 12-P-160, 800 hp triplex pumps each driven by two EMD D-79 DC traction motors, rated to 5,000 psi One HEX pump – 240 x 1200 hp, driven by 2 x 1,200 hp each motors, 975 gpm x 3400 psi @ 200 spm (90% of max SPM)
Solids control	4 x Thule VSM 300 Linear MotionShale Shakers.
Instrumentation	Petron IDS 2000 tracks and records pit volumes, standpipe and annulus pressures, depth, ROP, hookload, weight on bit and torque.

Power Equipment 

DC	Four Hill-Graham SCR units, 2,000 amps each
AC	Three EMD 16-645 E8 diesel engines, 1,450 hp, driving three EMD synchronous generators, 2625 KVA, at 900 RPM

Storage Capacities 

Liquid mud	2,370 bbls.
Base oil	1,436 bbls.
Bulk material	10,000 cu. ft.

BOP Equipment

Diverter	Hydril 2,000 psi, 21-1/4 in. diverter with two 12 in. discharge lines and 12 in. hydraulically operated ball valves
BOP stack	13-5/8 in. Cameron BOP stack, 5,000 psi annular and two Cameron 10,000 psi double ram preventers.
BOP handling	4 x 40 short tons hoist

Other Equipment

Cranes

Three Marathon LeTourneau PCM-120 cranes, two with 100 ft. booms and one with 120 ft. boom, rated for 50 short tons at 24 ft. radius

Special Features 

Cantilever extension	15 ft. wedge type extensions are available to increase the maximum skid out distance to 60 ft. from the stern and drilling envelope to 55 ft. by 30 ft.
Tender mode	For Tender Assisted Drilling (TAD) the drill floor and substructure of the cantilever can be skidded from the cantilever onto an adjacent platform.

Inquiries should be directed to the Marketing Department Houston 15375 Memorial Drive Houston TX 77079-4101 (281) 925-6000 Fax (281) 925-6010