|
 |
 |
The Fleet  Our Rigs List by Name Deepwater Frontier
Fleet Specifications
| Deepwater Frontier |
| |
| Rig Type |
5th Generation Deepwater |
 |
| Design |
R&B/Samsung, based on double hull |
| Builder |
|
| Year Built |
1999 |
| Classification |
ABS + A1E, MODU, FSO, + AMS, +ACCU, +DPS, DLA, OMBO, Cargo Gear Registry |
| Flag |
Panama |
| Accommodation |
Air-conditioned to accommodate 160 people. |
| Helideck |
Equipped to accommodate Sikorsky S61-N and Super Puma 322L |
| Moonpool |
48 ft x 48 ft |
| Station Keeping |
Kongsberg Simrad, SDP-32 triple computer voting |
| Max Drill Depth |
30,000 ft / 9,144 m |
| Max Water Depth |
10,000 ft / 3,048 m |
| Operating Conditions |
Winds 63.7 to 129.6 kph (depending on wave and current), damaged stability to 92.6 kph |
| Storm Conditions |
Winds 63.7 to 129.6 kph (depending on wave and current) |
Technical Dimensions
| Length |
726 ft |
221 m |
| Breadth |
137 ft |
42 m |
| Depth |
66 ft |
20 m |
| Operating Draft |
56 ft |
17 m |
| Ocean Transit Draft |
44 ft |
14 m |
| VDL - Operating |
20,800 mt |
22,928 st |
Capacities
| Liquid Mud |
5,093 bbls |
28,595 cu ft |
810 cu m |
| Drill Water |
17,610 bbls |
98,871 cu ft |
2,798 cu m |
| Potable Water |
6,290 bbls |
35,315 cu ft |
999 cu m |
| Fuel Oil |
28,300 bbls |
158,890 cu ft |
4,497 cu m |
| Bulk Mud |
|
34,000 cu ft |
962 cu m |
| Bulk Cement |
|
34,000 cu ft |
962 cu m |
| Sack Material |
10,000 sacks |
10,640 cu ft |
300 cu m |
Drilling Equipment
| Derrick |
170 ft. high with 40 ft. x 48 ft. base, dynamically designed to accommodate a top drive system; setback for 192 stands of 6-5/8 in. drill pipe, 228 stands of 5-1/2 in. drill pipe, and 16 stands of 9-3/4 in. collars, 2,000,000 lb. static load. |
| Drawworks |
6600 hp; 1,500 kips hook load |
| Motion Compensator |
Active Heave |
| Top Drive |
Varco TDS-8S (AC), 750 ton |
| Rotary |
60" opening, 1000 tons, 45000 ft-lbs @ 15rpm |
| Pipe Handling |
1 x Varco PHM-3i Pipe Racking System |
| Mud Pumps |
4 x National 14P220, 7500 psi |
| Shale Shakers |
4 x Derrick Hi-G; 2xDerrick Flowline scalping shakers |
| Desander |
|
| Desilter |
|
| Mud Cleaner |
Mud Cleaner: 2 x Derrick HI-G mud cleaner rated for 1500GPM |
| BOP |
1 x 18-3/4" Cameron TL 15,000 WP; (Single + Doubles) |
| LMRP |
2 x Annular type DL 18-3/4" 10,000 WP |
| Diverter |
Hydril FS 21" bore (18" flow line and 14" diverter outlets) |
| Control System |
Shaffer MUX System |
| Riser |
21", 3" x 15K choke/kill line, 4" x 7.5K mud boost line |
Riser
Tensioners |
8 x Maritime Hydraulics - Dual 160kips, max out |
Guideline
Tensioners |
N/A |
Podline
Tensioners |
N/A |
| Choke & Kill |
3" x 15,000 psi; 2 x remote chokes; 1 x manual choke |
| Cementing |
Halliburton Cement unit, 15000psi |
Machinery
| Main Power |
Three each Wartsila 18V32 diesel electric engine generator sets arranged one each in engine rooms number one, two, and three rated at 7.0 Megawatts (9333 hp) each. Engines designed to operate on diesel or HFO. |
| Emergency Power |
Main generator to provide 35,100 KW (47,000 hp). Emergency generator to provide 400 KW (536 hp). |
| Power Distribution |
AC System |
| Deck Cranes |
3 x 50 ton @ 43 ft (7224) Seatrax pedestal cranes, Model 7224; 1 x 85 ton @ 36 ft (8032) Seatrax pedestal crane, Model 8032; 2 x gantry cranes (pipe deck and riser storage area) |
| Thrusters |
6 x Azimuth FPP Thrusters, 5360HP each |
| Propulsion |
Same as Thrusters |
Mooring Equipment
| Winches |
| Quantity: no. 1 | Make/model: Aker Maritime Pusnes Type 250 HW 15M.10/M20 CU | 10.15 | 44.7 Tons @ 9 Mtrs/sec , | Max pull 67 Ton | Brake Holding Load = 307 Ton | Type (electric/hydraulic/diesel): Pusnes / Korea- Hydraulic Power Packs | Motors per winch: no. 1 | Motor make/type: Staffa
|
| Wire/Chain |
Make/type: CSSC
Diameter: 97 MM K3
Useful length (nominal): 385 m
|
| Anchors |
Type: Stockless type
Weight: 16 tons |
|
|
|
|
